Radar Setup selected from Radar menu (left). Radar Setup menu with Full Color on Black highlighted
To set the radar to Heading Up, highlight
•
To display the radar images in full color, press
•
Ent.
Use
•
return to the main page display.
Radar Setup
The two setup features to be modified are Adjust Trigger Delay and Adjust Heading Line.
This will be set up in that order, but before making any adjustments, make sure the display is
set to a range of 0.125 nautical miles and that Gain, Anti-Sea Clutter (STC), Anti-Rain Clutter
(FTC) and Trigger Delay all have been set to zero percent.
Trigger Delay Preparation
Range
To reset range to 0.125 nm, make sure you are on the Radar Only page and press Menu.
•
Use
•
Press
the radar screen by using the zin and zout keys.
Gain
To set Gain to zero, press Menu, select
•
Press
•
in the upper right-hand corner of the screen.)
Note: When adjusting Gain back to a useable level, increase the level until you see a light
peppering on the display. Also remember, you will have to adjust gain every time you change
ranges.
Anti-Sea Clutter
To set Anti-Sea Clutter to zero, press Menu, select
•
Press
•
corresponding value in the upper right-hand corner of the screen.)
Anti-Rain Clutter
To set Anti-Rain Clutter to zero, press Menu, select
•
Ent.
Press
•
corresponding value in the upper right-hand corner of the screen.)
62 | Connect to Lowrance Displays
to highlight one of the three full color options and press Ent. Press Exit to
Radar Range
to select
to select 0.125 nm and press Ent. You also can set the range to 0.125 nm from
until the Gain is set to zero percent. Press
until the Anti-Sea Clutter is set to zero percent. Press Exit. (Notice the
until the Anti-Rain Clutter is set to zero percent. Press Exit. (Notice the
(right).
Heading Up
and press Ent.
to select
and press Ent, which will call up the Radar Range list.
Gain
and press Ent.
Exit
. (Notice the corresponding value
Anti-Sea Clutter (STC)
Anti-Rain Clutter (FTC)
Radar Color Scheme
and press
and press Ent.
and press