Communications Port menu (left). Radar Notice (right) prompting users to leave radar in Standby Mode
for 30 minutes when activating radar for the first time.
Caution: Leave the radar in Standby Mode for 30 minutes when activating it the first time. This
will help maximize the life of the magnetron. After the radar has been activated the first time,
ignore the Radar Notice.
To access Radar Page:
•
Press Pages, then use
Press
to select
•
Radar only highlighted on Radar Pages menu (left). Radar menu with Radar Power selected (right).
•
Press Menu, then use
confirmation message will appear. Press to select Yes and press Ent. A warm-up
countdown will commence that will vary depending on the model of radar you have.
•
After the countdown is finished, the unit will enter STANDBY mode.
Access the Radar Setup menu to make sure your radar display is set to Heading Up and is
•
set to a Full Color scheme. Press Menu, select
to select the radar tab.
Radar Only
then press Exit.
Radar Power
to select
from the radar menu and press Ent. A
Radar Setup
and press Ent.
Connect to Lowrance Displays | 61