Navico 2kW Installation Manual page 39

Change the radar bearing alignment
Use the radar bearing alignment to rotate
object dead ahead is directly under the vessel's heading marker.
This means that the Radar
accurate bearing alignment is particularly important when the radar image is overlain onto the
chart.
It's best to do this on a page showing a
Radar
a screen in the other pane.
To change the radar bearing alignment:
Select Pages. If you:
•
-
don't have a page that shows the
the other pane, edit or create a page that shows these two screens.
-
do have a page that shows the
other, select it.
Chart
Check that the
•
Radar
Select the
•
Radar button, select Return.
Select Adjust Radar, then select Installation.
•
The Bearing Alignment button shows the current setting. Select it to change the
•
setting. Use the Up and Down buttons to move the radar image one degree at a time,
until the radar overlay is aligned with the chart.
Select OK.
•
• Select Return.
Other radar settings
To enter radar setup options:
• Select Pages, then Setup from the main menu.
Select + Radar to display a list of options.
•
-Radar
Radar Antenna Height
(Small Distance Units)
Radar Open Array Parking Angle
(Deg)
Radar Power on Action
Standby
Remain Off
Radar Information
switch
Select Return.
•
Radar
image is aligned with the displayed chart and the compass. An
Chart screen with the radar overlay on in one pane and
Radar
Radar
screen has the Radar Overlay turned On.
pane so that it becomes the active pane. If you can't see the Adjust
Default Installer
defined
4 m/13.12 ft
0
X
image, one degree at a time, so that a known
screen in one pane and the
screen in one pane and the
Description
Sets the antenna height above the
water-line so that the sea clutter control
works properly.
Sets the angle that the radar scanner
will come to rest.
When powered, the radar will warm up,
then go into standby mode.
When powered, the radar will remain
off.
Displays magnetron hours information
for the 10 kW and 25 kW scanners.
Connect Simrad GB40 or Northstar 8000i | 37
Chart
screen in
Chart
screen in the