Connecting To A Tv Or Vcr; Playback On A Tv; Dubbing To A Vcr - JVC GZ-MC500U Instructions Manual

24
VIDEO RECORDING & PLAYBACK
EN

Connecting to a TV or VCR

To AV connector
VCR
A
Black to S-VIDEO IN (Connect when your TV/
VCR has S-VIDEO IN and A/V input
connectors. In this case, it is not necessary to
connect the yellow video cable.)
B
Yellow to VIDEO IN (Connect when your TV/
VCR has only A/V input connectors.)
C
Red to AUDIO R IN*
D
White to AUDIO L IN*
* Not required for watching still images only.
NOTES:
It is recommended to use the AC adapter as
the power supply instead of the battery pack.
( pg. 15)
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camera is turned on.
To connect the camera to a PC, refer to the
software installation and USB connection guide.
Open the cover.
S-Video/Audio/Video
Cable
(provided)
TV

Playback on a TV

1
Make sure all units are turned off.
2
Connect the camera to a TV or VCR as
shown in the illustration.
If using a VCR, go to step 3.
If not, go to step 4.
3
Connect the VCR output to the TV input,
referring to your VCR's instruction manual.
4
Turn on the camera, the VCR and the TV.
5
Set the VCR to its AUX input mode, and set
the TV to its VIDEO mode.
6
Start playback on the camera. (
To choose whether or not the following
displays appear on the connected TV
Date/Time
Set [DATE/TIME] to [AUTO], [ON] or [OFF].
( pg. 48, 49)
Counter
Set [SCENE COUNTER] to [ON] or [OFF].
( pg. 48, 49)
(Pressing INFO button also turns on/off the
displays.)

Dubbing to a VCR

1
Perform steps 1 to 6 above.
2
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR's
instruction manual.)
3
To stop dubbing, stop recording on the VCR,
then stop playback on the camera.
pg. 22)