Call Mute; Call Transfer; Three-Party Conference - Huawei eSpace 7810 User Manual

Huawei IP Phone eSpace 7810
User Manual

4.5 Call Mute

To enable or disable the call mute function, press the X key. If the call mute function is
enabled, the message Mute is displayed on the screen, and the peer party cannot hear your
voice.

4.6 Call Transfer

You can transfer a call to other extension numbers or mobile numbers. eSpace 7810 supports
the following call transfer modes: blind transfer, semi-attend transfer, and attend transfer.
1.
2.
3.
4.
You can assign the call transfer function to a DSS key. For details, see

4.7 Three-Party Conference

To establish a three-party conference, use the conference key. In addition to the Conference
key, you can assign the conference function to a DSS key. For details, see DSS Key.
1.
2.
3.
4.
Issue 01 (2012-06-27)
In the conversation with user B, user A presses the Transfer key to hold user B's call.
User A dials user C's number.
User A performs call transfer.
− Blind transfer
Press the Transfer key.
After user C picks up the phone, user A hangs up the phone to complete the transfer.
If user C rejects the call, a message indicating transfer failure is displayed on the user
A's phone screen. User A presses any key and enters the held state. After pressing the
Hold key, user A resumes the call with user B.
− Semi-attend transfer
Press the OK key.
When user C's phone rings, user A presses the Transfer key. user A's phone hangs up
automatically, and the transfer is complete. Then user C picks up the phone.
− Attend transfer
Press the OK key.
After user C picks up the phone, user A asks user C whether user C wants to answer
user B's call. If user C says yes, user A presses the Transfer key to transfer the call to
user C. If user C rejects the call, user A presses the HoldResume key to resume the
call with user B.
User B talks with user C.
User A is talking with user B. User A presses the Conference key. User B is held, and
user A hears the dial tone.
User A dials user C's number and presses the OK key.
When user C picks up the phone, user A only talks with user C. To establish a
three-party conversation, user A presses the Conference key again.
When user A hangs up the phone, the other two parties' conversation ends automatically.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Using eSpace 7810
DSS Key.
51