Advertisement
DataStorm D3
| Advanced Functions
DataStorm D3 Calibrations: Dish
| DataStorm D3 Calibrations: Dish |
|
1-Starting the Dish Calibration
The dish calibration is done to test the
motor functioning of the dish.
User Guide
|
3-Dish Calibration Finish
You have completed the dish
calibration. Upon completion the dish
will end up in a stowed position. If any
errors were encountered please check the
Error Code Definitions for more details in
the DataStorm D2 Appendix.
|
2-Dish Calibration
The entire dish calibration takes about
8-10 min. During this time you can monitor
its progress by watching each of the axis'
move in motor counts or degrees.
v.1
17
Advertisement
