Advertisement
DataStorm D3
| Advanced Functions
DataStorm D3 Manual Motor Controls
| DataStorm D3 Manual Motor Controls |
|
1-Signal Quality Bar
Signal quality is attained via the modem.
This bar displays quality value.
|
2-Signal Strength Bar
Signal strength is a function of the D3.
This bar displays strength value.
|
3-System Status
Displays the current state of the D3.
|
4-Elevation Movement
Relates to the up and down motion of the
DataStorm dish. Displays both motor counts
and actual angle in degrees. The top arrow moves
the dish up, the bottom arrow, down based on
the number in #7.
|
5-Azimuth Movement
Relates to the left and right motion of the
DataStorm dish. Displays both motor counts
and actual angle in degrees. The left arrow
moves the dish counter-clockwise, the right arrow,
clockwise based on the number in #7.
User Guide
1
2
3
4
5
6
7
8
9
|
6-Skew Movement
Relates to the left and right motion of the
dish face [polarization]. Displays both motor
counts and actual angle in degrees. The left
arrow moves the dish closer to zero, the right
arrow, increases based on the number in #7.
|
7-Stop
Stops any current motor movement
|
8-Input Box
Place a value here to move the DataStorm.
|
9-Degrees or Counts
The DataStorm dish can move by motor counts
[when a motor's gear makes a revolution], or it
can move in degrees.
v.1
15
Advertisement
