Table of Contents
Advertisement
S I E M E N S
ST55 Level 2 Service Manual
Step 7
2
Slide PCB into FRAME CASE from bottom and
connect CAMERA FPC
Step 9
Reassemble the 2 screws (M1.6*6.5) located on the
PCB
Step 11
Cover TOP CASE ASSY from top and press slightly to
close along both sides.
Copyright © Siemens Pte Ltd.
All Rights Reserved
ICM MP CCQ SLI RHQ
P T E L T D
1
13 of 25
Step 8
Slide middle assy. into BASE CASE ASSY. from
bottom
Step 10
Reassemble KEYSET into TOP CASE ASSY
Step 12
Reassemble the 2 screws (M1.6*6.5) located on
BASE CASE ASSY. and place the CARKIT RUBBER.
Siemens Technical Support Centre
Internal Use Only
Advertisement
Table of Contents
