Table of Contents
Advertisement
S I E M E N S
ST55 Level 2 Service Manual
7
Reassembly of ST55
Step 1
Put back Vibrator into BASE CASE and tighten the
SCREW (M1.6*1.5).
Step 3
Align the position and push ANTENNA ASSY back to
FRAME CASE
Step 5
Assemble SHIELD_KEY and MICROPHONE. The
SHIELD_KEY should hook on to the PCB properly at
the bottom.
Copyright © Siemens Pte Ltd.
All Rights Reserved
ICM MP CCQ SLI RHQ
P T E L T D
12 of 25
Step 2
Align the position and push CAMERA into the
ANTENNA ASSY
Step 4
Assemble KEYPAD FPC, LCD Module
Step 6
Place KEY JOYSTICK, the 2 bulges should be
positioned horizontally.
Siemens Technical Support Centre
Internal Use Only
Advertisement
Table of Contents
