Siemens SIMATIC PCS 7 OSx Hardware Manual page 43

SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)
The
Magneto Optical Test
drive and the ability to read from and write to the drive.
runs all the above tests in the listed order.
Run All Tests
Review Test Results
File displays a simple Pass or Fail for the test run. The Detail File
offers additional information about the test run. You can view these
files on the screen or print them to a selected printer.
Clear Output Files
Results option.
Printer Calibration
RGB II) against all-white and all-black screens. To run this calibration
you must be in the Offline state with no editor running.
dismisses the diagnostics screen.
Quit
To cancel a diagnostic test while it is running, press the
that this not only stops the current test from running, but also dismisses
the diagnostics process.
checks for the presence of the magneto-optical
creates two files when you run a test. The Results
clears both the files created in the Review Test
allows you to calibrate a video printer (Tektronix
key. Note
Delete
Optional Card Locations 2-7