Preface - Siemens SIMATIC PCS 7 OSx Hardware Manual

Purpose of This
Manual
What's in the Other
Manuals?
SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)
The SIMATIC PCS 7 OSx 4.0.0 Hardware Manual (PA–RISC) includes
installation procedures, hardware descriptions, and maintenance
information about the B132L+ model of SIMATIC PCS 7 OSx.
Chapter 1 describes the SIMATIC PCS 7 OSx hardware components
and how they connect to the system.
Chapter 2 describes card locations and explains how to use system
diagnostics.
The HP Model B132L/B132L+/B160L/B180L Owner's Guide that is
packed with your B132L+ computer gives further information about
installing and using hardware components.
The OSx manual set consists of several manuals. If you cannot find the
information that you need in the SIMATIC PCS 7 OSx Hardware Manual
(PA RISC), check these other books:
SIMATIC PCS 7 OSx System Administration Manual
offers help in configuring network nodes, and for procedures that
describe how to configure printers, how to archive data, and how to
back up files.
SIMATIC PCS 7 OSx Process Configuration Manual
describes the primary tasks required to configure your system for
controlling your process.
SIMATIC PCS 7 OSx Graphical Editor Manual
describes how to create the graphical displays used with OSx.
SIMATIC PCS 7 OSx Reports Manual
create reports on your process and your configuration.
SIMATIC PCS 7 OSx Recipe Manual
advanced configuration tasks involving the creation and use of recipes.

Preface

This manual
This manual
This manual
This manual describes how to
This manual describes more
Preface vii