Table of Contents
Advertisement
1-28
C
1: G
S
HAPTER
ETTING
TARTED
Setting the Unit Name
Before you configure the unit to connect to any other network, you must
first give the unit a name. Enter
at the command prompt on the Quick
NA
Configuration screen to display the screen illustrated in
Figure
1-15.
The fields on this screen are:
Unit Name Type in a suitable name for this unit. The name can be up
to 12 characters long, must contain no spaces and should, where
possible, give an indication of the geographical location of the unit or
the name of the users.
Manager LAN IP Address Type the IP address for this unit. It must be a
unique IP address on your network.
Manager LAN IP Mask Enter an appropriate IP subnet mask. See
"Subnet Masking"
in
Appendix A
for more information about subnet
masks.
Network Type Toggle the network type to match the ISDN service
provided by your ISDN service provider.
Figure 1-15 Setting The Unit Name
Advertisement
Table of Contents
