3Com AccessBuilder 500 User Manual page 50

1-30 C 1: G S
HAPTER ETTING TARTED
Remote ISDN Number Type the ISDN number of the remote unit that
connects to the Novell network.
Call Type Set the Call Type required for your ISDN line. Toggle this field
to the Call Type required by your ISDN service provider.
Press [CTRL]+[E] to submit this information.
When you do this, the unit automatically makes a short call to the
remote unit to interrogate the remote network for information about
its servers. When it has obtained the information it needs the call is
automatically disconnected. The unit then updates the autocall table so
that when data is destined for a remote server, the unit automatically
dials the correct ISDN number and connects to the remote network.
Enter at the command prompt to permanently store this
SAVE
configuration in the unit's memory.