Sioux Tools IW38TB P-3P Operator Instructions Manual

Model IW38TB P-3PlI W38TBP-2Q
Impact Driver
Operator Instructions
^
Includes
-
Foreseen Use, Work Stations, Putting Into Service,
Ooeratina. Dismantlina. Assemblv and Safetv Rules.
Sioux Tools, Inc.
250 Snap-on Drive
P.O. Box 1596
Murphy, NC 28906
U.S.A.
Tel No. 828-835-9765 Fax No. 828-835-9685
Air Pressure
Product Net Weight
IW38TBP-3P 2.09 Ibs 0.95 kg
1W38TBP-2Q 2.13 Ibs 0.97 kg
Recommended Working
6.2
bar
90
PSI
Maximum
6.2
bar
90
PSI
Recommended Use Of
Balancer Or Support
N O
Personal Safety Equipment
Always Read Instructions
Use
-
Safety Glasses YES
1
Before Using Power Tools
@
/ A & e ; ; & a r Safety
Use
-
Safety Gloves
-If the tool appears to malfunction,
remove from use immediately and
arrange for service and repair. If it is
not practical to remove tool from
service, then shut off the air supply
to the tool and write or have written a
warning note and attach it to the tool.
- If tool is to be used with a balancer or
other suspension device, ensure that
the tool is firmly attached to the
suspension/support device.
- When operating the tool, always keep
Use
-
Safety Boots
Use
-
Breathing Masks
Use
-
Ear protectors YES
Form # ZCE795
Date 2008
June
20lA
@
Wear Hearing Protection
A
To Vibration
Important
Safety rules when using IW38TBP-3P/
IW38TBP-2Q Impact Driver
-Use only impact sockets and extensions, universal
joints, etc. rated as being suitable for use withimpact
wrenches.
-
Prolonged exposure to vibration may cause injury.
-Read all instructions before using this tool. All
operators must be fully trained in its use and aware of
these safety rules.
-Do not exceed the maximum working air pressure.
- Use personal protection equipment as recommended.
- Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects and other
reproductive harm.
-Use only compressed air at the
recommended conditions.
7
Read these instructions carefully before installing, operating,
servicing or repairing this tool. Keep these instructions in a safe
accessible dace.
-
Product Type
,
Impact Driver
Recommended
H o s e [
Recommended Max.
Cycles Per Min.
dodel NoINos
W38TBP-3P (3/8" Pin)
W38TBP-2Q (1/4" QCC)
Size
-
Minimum Hose Length
318
ins
10
m m
1
3 0 F t 1 0 M
Serial No.
Noise Level:
Sound Pressure Level 84.0 dB(A)
Sound Power Level 95.0 dB(A)
Test Method:
Tested in accordance with Pneurop
test code PN8NTC1 and I S 0 Standard 3744
Vibration Level
LessThan 2.5
Meters
I
Sec2
Test Method: Tested in accordance with I S 0
standards 8662 Parts 1 & 7
the body and particularly the hands away from the work-
ing attachment fixed to the tool.
-The tool is not electrically insulated. Never use the tool
if there is any chance of coming into contact with live
electricity.
-Always when using the tool, adopt a firm footing and/or
position and grip the tool sufficiently only to overcome
any reaction forces that may result from the tool doing
work. Do not overgrip.
-Use only correct spare parts for maintenance and
repair. Do not improvise or make temporary repairs.
Major servicing and repairs should only be carried out
by persons trained to do so.
-
Do not lock, tape, wire, etc. the 'On/Off' valve in 'On'
position. The triggerllever, etc. must always be free to
return to the 'Off' position when released.
All Pipe And Fittings
Should Be 112' Or Large
Easy To Reach And
Air Tool
Recommended Air
supply
System Figure 1
Page No
1