Sioux Tools 5038B Operator Instructions Manual

Operator Instructions
Includes
-
Foreseen Use, Work Stations, Putting Into
Service,
Operating, Dismantling, Assembly and Safety Ruies.
Sioux Tools, Inc.
1 17
Wi Drive
Murphy, NC 28906
U.S.A.
Tel No. 828-835-9765
Fax No. 828-835-9685
Air Pressure
- - - -
Product Net Weight
Recommendedworking 6.2 bar 90
PSI
Maximum 6.2 bar 90 PSI
Recommended
Use Of
- - - -
SAFETY MESSAGES
I
A
WARNING
Personal Safety
Equipment
Use-S&tyGIase~
YES
1
Always
Wear Safety
Use
-
Safety Gloves
3 . 7 5
Ibs
1.70
Kg
Balancer Or Support
N O
recommended conditions.
1
Use
-
Safety Boots
Use
-
Breathing Masks
USB
-
Ear Pme3oss YES
- I f
the
tool appears to malfunction,
remove from use immediately and
arrange for
service and repair. If it is
not practical to remove tool from
service,
then shut off
the air supply
to the tool
and write
or
have written
a
warning note
and
attach it to the
tool.
-
If
toot is to be used with
a balancer
or
other suspension device,
ensure
that
the tool is firmly attached lo
the
suspension/support device.
@
Wegr
Hearing Protection
Avoid Prolonged Exposure
A
Important
Read these instructions carefully before installing, operating,
servicing o r repairing this tool. Keep these
instructions in a safe
Safety rules when using 50380 and
5039B Impact Wrenches
- U s e
only impact sockets
and extensions, universal
joints, etc. rated as being suitable for use with impact
wrenches.
-Prolonged exposure to vibration may cause injury.
-Read all instructions
before using this tool.
AH
operators must be fully trained in its use and aware of
these safety rules.
-
Do not
exceed the
maximum
working air pressure.
-
Use personal protection equipment as recommended.
-
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects and other
reproductive harm.
- U s e
only
compressed air a? the ,
accessible (dace.
Product Type
3/8" Square
Drive Pistol
Grip Impact Wrenches
Model No/Nos
50388
Steel
Nose Case
Chrome Plated
5039B
Steel Nose Case
Black
Recommended H o s e Bore
Size
-
Minimum
318ins 1 0 m m
1
Serial
No.
Recommended Max.
Hose Length
30 Ft
10 M
Noise
Level:
Sound
Pressure Level 84.6 dB(A)
Sound Power Level 95.6 dB{A)
Test Method:
Tested in
accordance
with Pneurop
test code PN8KTC1 and IS0 Standard
3744
Vibration Level
3.5 Meters 1 Sec2
Test Method: Tested in accordance with IS0
standards 8662
Parts
1 & 7
the body and particularly the hands away from
the
working attachment fixed to the
toot.
-The tool is n'ot electrically insulated. Never use the tool
if there
is any
chance of corning into contact
with live
electricity.
-
Always
when using the too!, adopt a firm footing
andfor
position and grip the tool sufficiently only to overcome
any
reaction forces that
may
result from
the tool doing
work. Do not overgrip.
-Use only correct spare parts for maintenance and
repair. Do not
improvise
or make temporary repairs.
Major servicing and repairs should only be carried out
by persons trained to do so.
-Do
not
lock,
tape, wire. etc. the 'OnIOff' valve in 'On'
position. The triggernever, etc. must always
be
free to
Take
Air From Top
A* Pipe
And Finings
Stwufd
Se Iff"
0 Larger
Low Spot To
Compressor
with Sufficient Capacity
To
Maintain Recommended
Workig Pressure Ai
-When operatinittie tool. always keep
1
Recommended Air
Supply
System
Figure 1
Page
No
1