JVC GR-SX860 Instructions Manual page 24

Compact vhs camcorder
Hide thumbs Also See for GR-SX860:
Table of Contents

Advertisement

24
EN
SYSTEM MENU (cont.)
S-VHS*
(S-VHS ET*)
TAPE LENGTH
DISPLAY
REC TIME
INT. TIME
TELE MACRO
TITLE LANG.
DATE/TIME
DEMO MODE
* S-VHS ET is displayed when a VHS cassette is loaded, and S-VHS is displayed when an S-VHS cassette is
loaded (
pg. 10). If a cassette is not loaded, "S-VHS" will be displayed in the Menu Screen.
S-VHS ET is preset to "OFF".
: Factory-preset
Records in S-VHS on a VHS or S-VHS cassette (
ON
Records in VHS on a VHS or S-VHS cassette (
OFF
Allows you to set the tape length depending on the tape used (
Make all of the indications appear on the viewfinder during
FULL
playback or recording.
Make the following indications disappear from the viewfinder
SIMPLE
during recording or playback: cassette warning, tape remaining
time, battery pack remaining power indicator and tape length
indicator (
Refer to "Animation" and "Time-Lapse" (
Refer to "Time-Lapse" (
Usually the distance to a subject where the lens is in focus
OFF
depends on the zoom magnification. Unless there is a distance of
more than 1 m (3.25 ft) to the subject, the lens is out of focus at
the maximum telephoto setting. When set to "ON", you can
ON
shoot a subject as large as possible at a distance of approx.
60 cm (23-5/8").
•Depending on the zoom position, the lens may go out of focus.
Allows you to select the language (ENGLISH, FRENCH, SPANISH or PORTUGUESE)
of Instant Titles (
pg. 25).
Allows you to set the current date and time (
Demonstrates certain functions automatically. When "DEMO
ON
MODE" is set to "ON" and the Menu Screen is closed, the
demonstration starts.
Operating the Power Zoom Lever during the demonstration
stops the demonstration temporarily. If the Power Zoom Lever is
not moved for more than 1 minute after that, the demonstration
will resume.
NOTE:
When a tape whose Erase Protection tab is in the position that
allows recording is loaded in the camcorder, demonstration is
not available.
OFF
Automatic demonstration will not take place.
RECORDING
pg. 40, 41)
pg. 26).
pg. 26).
Advanced Features (cont.)
pg. 12).
pg. 9).
pg. 10).
pg. 10).

Advertisement

Table of Contents
loading

Table of Contents