Table of Contents
Advertisement
EJECT Switch
Cassette holder
Close Button
Erase Protection tab
Gear
Loading/Unloading A Cassette
1
2
3
NOTES:
The cassette holder can't be opened unless a power
supply is attached.
Make sure that the tape is not slack when loading the
cassette. If there is any slack, turn the gear on the
cassette in the direction of the arrow to take up the
slack.
Make sure the Erase Protection tab is in the position that
allows recording. If not, slide the tab. Some cassettes
have removable tabs. If the tab has been removed, cover
the hole with adhesive tape.
Turn to take
up slack.
The cassette holder cannot be opened while the
camcorder is in the record mode.
Slide EJECT until the cassette holder opens. Do not
use force to open.
Insert or remove a cassette. When inserting, make
sure the label is facing outward.
Press the Close button to close the cassette holder
until it locks into place.
13
EN
Advertisement
Table of Contents
