Avaya Voice Priority Processor Installation Manual page 13

•
IP Address –
network administrator. Enter the complete address including digits and periods.
be entered.
•
Hostname
Avaya Voice Priority Processor to which you are connected, for identification purposes
only. You cannot enter spaces in this field.
•
SVP-II TFTP Download Master –
the Avaya Voice Priority Processor. See the Software Maintenance section for more
information.Valid source location entries are:
1. NONE – disables.
2. IP Address – the IP address of a network TFTP server that will be used to transfer
software updates to the Avaya Voice Priority Processor.
•
DNS server
services. Consult your system administrator for the correct settings. These can also be set to
. This will cause the DHCP client in the Avaya Voice Priority Processor to attempt to
DHCP
automatically get the correct setting from the DHCP server. The DHCP setting is only valid
when the IP address is also acquired using DHCP.
•
WINS servers
administrator for the correct settings. These can also be set to
DHCP client in the Avaya Voice Priority Processor to attempt to automatically get the
correct setting from the DHCP server. The DHCP setting is only valid when the IP address
is also acquired using DHCP.
555-301-102, Issue 2
July 2003
enter the IP address of the Avaya Voice Priority Processor, defined by your
-(optional) change the default host name, if desired. This is the name of the
and – These settings are used to configure Domain Name
DNS domain
– These setting are used for Windows Name Services. Consult your system
this entry indicates the source of software updates for
Avaya Voice Priority Processor
Installation
DHCP
. This will cause the
DHCP
may
13