Geneq SXBlue II Technical Reference Manual page 23

numbers older than 0808A100, not programmed with a passkey.
From the desktop, tap the Bluetooth Icon and select "Menu/Bluetooth Settings". In the "Devices"
tab, tap "Add new device...".
Once the SXBlue II GPS has been found, select it then tap "Next". The driver will ask for a
"Passcode"; at this point do not enter any value and simply hit "Next".
In the next window, "SXBlue II GPS ... wants to connect...", select "Yes". The driver will ask
again for a "Passcode"; at this point enter just a blank space using the keypad.
SXBlue II GPS Series Technical Reference Manual 8