Wireless Encryption - Bosch Mastertech M-VCI Installation Manual

Note: If your network utilizes
Static IP addresses, see
Appendix A.
Step 4 – Setting up your
M-VCI (Applies to Types
I, II & III) (Setting the
Wireless SSID)
f Click: Refresh
f Select: Available Network
– Bosch_VCI_AP
(include underscores)
f Click: Configure
Option: You can manually enter SSID
Bosch_VCI_AP into the text box.
Note: Refer to Appendix D when
dealing with a network with
multiple access points.
Step 4 – Setting up your
M-VCI (Applies to Types
I, II & III) (Setting the

Wireless Encryption)

f Verify: Network Authentication
M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | April 2011
Installation Steps | Step 4 | 12
– WPA – Personal
– TKIP
f Enter: security password
– Bosch_VCI_800-321-4889
(include underscores)
f Click: Next
Note: Double check password:
Bosch_VCI_800-321-4889
Step 4 – Setting up your
M-VCI (Applies to Types
I, II & III) (Verifying your
Settings)
f Verify Your Settings
f Click: Yes, Select OK
f Wait for the "Configuration
Complete" Message
Robert Bosch LLC