Detaching The Front Panel; Preparing The Remote Control; Display Indication - Pioneer MVH-X370BT Owner's Manual

Frequently used operations
Purpose
Turn on the power* Press SRC/OFF to turn on
the power.
Press and hold SRC/OFF to
turn off the power.
Adjust the volume Turn the M.C. dial.
Select a source Press SRC/OFF repeatedly.
Change the display Press DISP repeatedly.
information
Return to the previous Press
display/list
Return to the normal display Press BAND/
from the menu.
Answering a call Press
Ending a call Press
* When this unit's blue/white lead is connected to the vehicle's auto-antenna relay control terminal,
the vehicle's antenna extends when this unit's source is turned on. To retract the antenna, turn the
source off.

Display indication

Indication Description
Appears when a lower tier of the menu or folder exists.
Appears when the automatic answering function is set (page 10).
Appears when the button is pressed.
Appears when the local seek tuning function is set (page 13).
Appears when the sound retriever function is set (page 13).
Appears when random/shuffle play is set (except when BT AUDIO is
selected as the source).
Appears when repeat play is set (except when BT AUDIO is selected as the
source).
Appears when the iPod control function is set (page 8).
Operation
Head Unit Remote Control
Press SRC to turn on the
power.
Press and hold SRC to turn
off the power.
Press VOLUME + or –.
Press MUTE to mute the
unit. Press again to unmute.
Press SRC repeatedly.
Press DISP repeatedly.
/DIMMER. Press / to select the
next/previous folder.
.
–
. Press .
. Press .
Indication Description
Appears when a Bluetooth connection is made (page 9).

Detaching the front panel

Detach the front panel to prevent theft. Remove any cables and devices attached to the
front panel and turn off the unit before detaching it.
Detach
Important
• Avoid subjecting the front panel to excessive shock.
• Keep the front panel out of direct sunlight and high temperatures.
• Always store the detached front panel in a protective case or bag.

Preparing the remote control

Remove the insulation sheet before use.
How to replace the battery
Insert the CR2025 (3 V) battery with the plus (+) and
minus (–) poles orientated properly.
Attach
5
En