Connection To A Personal Computer - JVC GR-DX107 Instructions Manual

Connection To A Personal Computer

[A] Using USB cable
To USB
USB cable
(provided)
To USB
connector
PC
When connecting the camcorder to a PC using a DV
cable, make sure to follow the procedure below.
Connecting the cable incorrectly may cause
malfunctions to the camcorder and/or the PC.
Connect the DV cable first to the PC, and then to the
camcorder.
Connect the DV cable (plugs) correctly according to the
shape of the DV connector.
[B] Using DV cable
OR
To DV IN/OUT
Core filter
DV cable
(optional)
Core filter
To DV
connector
PC with DV
connector
[A] Using USB cable
It is possible to do the following things:
Transfer still images stored on a memory card to a PC.
Transfer still/moving images recorded on a tape to a
PC.
Capture still/moving images in real-time.
Use this camcorder as a WebCam.
[B] Using DV cable
It is also possible to transfer still/moving images to a PC
with a DV connector by using the provided software,
software equipped with the PC or commercially available
software.
NOTES:
Refer to "SOFTWARE INSTALLATION AND USB
CONNECTION GUIDE" for the installation of the bundled
software and drivers.
The software operation manual is provided as PDF file on
the CD-ROM.
It is recommended to use the AC Adapter as the power
supply instead of the battery pack. (
Never connect the USB cable and the DV cable
simultaneously to the camcorder. Connect only the
cable you wish to use to the camcorder.
When using a DV cable, be sure to use the optional
JVC VC-VDV206U or VC-VDV204U DV cable depending
on the type of DV connector (4 or 6 pins) on the PC.
If the PC connected to the camcorder via the USB cable is
not powered, the camcorder does not enter the USB mode.
The date/time information cannot be captured into the PC.
Refer to the instruction manuals of the PC and Software.
The still images can also be transferred to a PC with a DV
connector-equipped capture board.
The system may not work properly depending on the PC or
capture board you are using.
"USB MODE" and/or "ACCESSING FILES" appears
on the LCD monitor while the PC is accessing data
in the camcorder or the camcorder is transferring a
file to the PC.
NEVER disconnect the USB cable while
"ACCESSING FILES" is displayed on the LCD
monitor since this can result in product damage.
EDITING
39
EN
pg. 11)