JVC GR-DX107 Instructions Manual page 10

GETTING STARTED
10
EN
How To Attach The Lens Cap
To protect the lens, attach the
provided lens cap to the
camcorder as shown in the
illustration.
NOTE:
To confirm the lens cap is on
correctly make sure the cap is flush
to the camcorder.
Place here during shooting.
How To Use The Audio Extension Cable
When using an optional
external microphone,
connect to the provided
Audio extension cable
(with a core filter
attached), then connect
the Audio extension
cable to the camcorder.
The core filter reduces
interference. (See the
right column.)
Open the cover.
To MIC
Audio extension cable
(provided)
Core filter
Stereo microphone
How To Attach The Core Filter (for USB Cable and
Audio Extension Cable)
Attach the core filters to the cables. The core filter
reduces interference.
1
Release the stoppers on both ends of the core filter.
Stopper
2
Run the cable through the core filter, leaving approx.
3 cm of cable between the cable plug and the core filter.
USB cable
Wind the cable once around the outside of the core filter
as shown in the illustration.
Core filter (large)
3 cm
Audio Extension cable
Wind the cable twice around the outside of the core filter
as shown in the illustration.
Core filter (small)
3 cm
Wind the cable so that it is not slack.
3
Close the core filter until it clicks shut.
USB cable
NOTES:
Take care not to damage the cable.
When connecting a cable, attach the end with the core filter
to the camcorder.
Wind once.
Wind twice.
Audio Extension cable