Grip Adjustment; Viewfinder Adjustment; Brightness Adjustment Of The Display; Tripod Mounting - JVC GR-DX107 Instructions Manual

Grip Adjustment

1
Adjust the velcro strip.
2
Pass your right hand through the loop and grasp the
grip.
3
Adjust your thumb and fingers through the grip to
easily operate the Recording Start/Stop Button and
Power Zoom Lever. Be sure to fasten the velcro strip to
your preference.

Viewfinder Adjustment

1
Set the Power Switch to "A" or "M" while pressing
down the Lock Button located on the switch.
2
Make sure the LCD monitor is closed and locked. Pull
out the viewfinder fully and adjust it manually for best
viewability.
3
Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
PAUSE
CAUTION:
When retracting the viewfinder, take care not to pinch your
fingers.
Dioptre Adjustment Control

Brightness Adjustment Of The Display

1
Set the Power Switch to "M"
or "PLAY" while pressing down
the Lock Button located on the
switch.
2
Open the LCD monitor fully.
( pg. 15)
To adjust the brightness of the
viewfinder, pull out the
viewfinder fully and set
"PRIORITY" to "FINDER"
( pg. 27, 29).
3
Press MENU. The Menu
Screen appears.
4
Press or to select
"n", and press SET. The
CAMERA DISPLAY Menu
appears.
5
Press or to select "BRIGHT", and press SET.
The Menu Screen closes and the brightness control
indicator appears.
6
Press or until the appropriate brightness is
reached.
7
Press SET to clear the brightness control indicator
form the display.

Tripod Mounting

To attach the camcorder to a
tripod, align screw to the
mounting socket on the
camcorder. Then tighten the
screw clockwise.
GETTING STARTED
EN
MENU
(Up)
SET
(Left)
SET
(Right)
(Down)
BRIGHT
13