4. Double-click Protocol.
5. Choose Internet Protocol (TCP/IP). Click the OK button to return to the
Network window.
6. The TCP/IP protocol will be listed in the Network window. Click OK to
complete the installation procedure.
Setting Up TCP/IP
To access the Internet through the BLW-04EM, you must configure the network
settings of the computers on your LAN to use the same IP subnet as the
BLW-04EM. The default network settings for the BLW-04EM are:
Gateway IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Figure6
Figure7
14