Setting Of Sc-380 - JUKI DLN-6390 Engineer's Manual
High-speed, 1-needle, cylinder-bed, needle-feed, lockstitch machine with large hook; high-speed, 1-needle, cylinder-bed, needle-feed, lockstitch machine with automatic thread trimmer and large hook
Hide thumbs
Also See for DLN-6390:
- Instruction manual (380 pages) ,
- Handbook (257 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
5. SETTING OF SC-380
It is necessary to set the following settings after set-up of
SC-380 to use SC-380 with DLN-6390-7.
Contents of setting varies according to the version of SC-
380. Perform setting after checking the English letter indicated
at the end of serial No. of the control box.
[In case of SC-380 that "A or B" is indicated at the end of serial No.]
* Select "AXDL" with the simplified model setting.
1
Set the program mode [3]. (
2
3
4
5
[In case of SC-380 that "C" is indicated at the end of serial No.]
* Select "6390" with the model setting.
1
Set the program mode [1]. (
2
3
4
5
+ [A] + [D])
* Mode is changed to program mode [3].
* Press
* Press
* Further, continue pressing
seconds) and the mode returns to the normal
mode after the display has been changed over to
[AXDL].
+ [A] + [B])
* Mode is changed to program mode [1].
* Press
* Press
* Further, continue pressing
seconds) and the mode returns to the normal
mode after the display has been changed over to
[6390].
34
This English letter
until [AXDL] is displayed.
when [AXDL] is displayed.
(more than two
until [6390] is displayed.
when [6390] is displayed.
(more than two
Advertisement
Table of Contents
