Installation; Electric Power Supply - Saunier Duval OPALIA X13 Installation And User Instructions Manual

FLUE LOCATION
C
N
E
F
M
A
B
D

INSTALLATION

Before installing the water-heater, the water
pipework must be flusched out to ensure that there
is no foreign matter present that could damage the
heater.
NOTE : do not use solvent products.
Using the template supplied, fasten the hanging
bracket onto the wall.
Hang the water heater onto the hanging bracket.
Connect the pipework and fittings, supplied, to
the gas inlet, cold water inlet and hot water outlet,
see diagrams.
C A

ELECTRIC POWER SUPPLY

Connect the water-heater power supply cable to
the 230V mains supply. Ensure that the live and
neutral are connected correctly. To comply with
current standards, this connector must be made
through a double-pole switch with a contact
separation of no less than 3 mm.
6
A - Under a window ................................................. 600
G
B - Under an air vent ................................................ 600
C - Under a gutter ..................................................... 300
D - Under a balcony ................................................. 300
E - From an adjacent window ................................ 400
F - From an adjacent air vent ................................. 600
G - From vertical or horizontal air pipes ................... 600
H - From an external corner of the building .......... 300
L I - From an internal corner of the building ......... 1000
I
H
L - From the ground or from another floor .......... 1800
M - Between two terminals vertically .................... 1500
N - Between two terminals horizontally .................. 600
B
Minimum dimensions (in mm)
for the positioning of flue terminals
A - Gas inlet
B - Cold water inlet
C - Hot water outlet
C
Water
mechanism
filter
gasket
cold water inlet
Warning : the power supply cable built into the
water-heater is specific to it. If you wish to replace
it, please order a new one quoting part number
59114 from an approved Saunier Duval dealer.
A B
B
flow rate
limiter
cold water isolating
valve