After Conversion - Miele KM 3010 Operating And Installation Instructions

After conversion

Conversion to a different type of gas
Check all gas fittings for leaks by operating the burners
without the combiset surface in place (use a match to
ignite the flame).
^ Reassemble the appliance.
^ Light each of the burners in turn to be sure they are
operating correctly.
When set at "low" or when the control knob is quickly turned
from "high" to low the flame should not go out.
When set at "high" the gas flame must burn with the center
clearly visible.
^ After converting the cooktop, affix the label supplied with
the conversion kit on to the data plate over the type of gas
stated.
41