High-Voltage Traction Battery (Hvtb) Systems Depowering - Ford FUSION HYBRID 2012 Modifiers Manual

2-6
NOTICE: Power outlets are designed for accessory plugs only. Do not insert any other
object in the power outlet as this will damage the outlet and blow the fuse. Do not hang any
type of accessory or accessory bracket from the plug. Improper use of the power outlet can
cause damage not covered by your warranty.
Note: Do not use the power point for operating the cigarette lighter element (if equipped).
To prevent the fuse from being blown, do not use the power point(s) over the vehicle capacity of
12-VDC/180W.
To prevent the battery from being discharged, do not use the power point longer than necessary
when the engine is not running.

High-Voltage Traction Battery (HVTB) Systems Depowering

1. Position the vehicle in the repair bay.
2. Turn the ignition switch to the OFF position.
3. Note: If the center safety belt retractor locks and the safety belt webbing prevents the 60
percent backrest from lowering, raise the backrest upward to release the safety belt
retractor and the belt webbing.
Fold the LH backrest down.
• Between the HVTB and the sheet metal, locate the seat backrest latch release lever.
• Push the release lever toward the outboard side of the vehicle and fold the backrest down.
Section 2: Electrical
2012 Fusion Hybrid, MKZ Hybrid Modifiers Guide, 09/2011
Electrical