Using The Remote Control Unit; Installing The Battery - JVC GR-DVA1 Instructions Manual

USING THE REMOTE CONTROL UNIT

A
2
1
Slot
B
2
3
1
1
Knob
Remote sensor
3
Transmitted beam
effective area
5m
30
The Full-Function Remote Control Unit can operate this
camcorder from a distance as well as the basic operations
(Playback, Stop, Pause, Fast-Forward and Rewind) of your
VCR. The RM-V712U remote control unit (optional) makes
additional playback functions possible.

Installing The Battery

The remote control uses one lithium battery (CR2025).
1
PULL OUT BATTERY HOLDER
: Pull out the battery holder by inserting a
A
pointed instrument into the slot.
: Pull out the battery holder while pressing the
B
knob as shown.
2
INSERT BATTERY IN HOLDER
Insert the battery in the holder, and be sure to have
the "+" mark visible.
3
RE-INSERT HOLDER
Slide the holder back in until you hear a click.
•Read the caution concerning lithium batteries
( pg. 2).
When using the remote control, be sure to
point it at the remote sensor. The illustration
shows the approximate transmitted beam
effective area for indoor use.
The transmitted beam may not be effective or
may cause incorrect operation outdoors or
when the remote sensor is directly exposed to
sunlight or powerful lighting.
30
45
EN