Table of Contents
Advertisement
60
EN
SYMPTOM
32. The charge indicator on
the AC Power Adapter/
Charger does not light.
33. The recording mode
indicator "LP" blinks.
34. Picture does not appear in
the viewfinder.
35. When the image is printed
from the printer, a black
bar appears at the bottom
of the screen.
36. The power lamp blinks.
TROUBLESHOOTING
POSSIBLE CAUSES
32. •The temperature of the
battery is extremely high/
low.
•Charging is difficult in
places subject to extremely
high/low temperatures.
33. •This occurs when recording
in the LP mode is not
available. After the indicator
blinks, the recording mode
switches to "SP" and
recording goes on.
34. •The lens cover is closed.
35. •This is not a malfunction.
36. •The camcorder was turned
on when the battery power
was almost gone.
CORRECTIVE ACTION
32. •To protect the battery, it is
recommended to charge it
in places with a temperature
of 10°C to 35°C (50°F to
95°F) (
pg. 67).
33.
————
34. •Open the lens cover
(
pg. 16).
35. •By recording with Picture
Stabilizer activated
(
pg. 18) this can be
avoided.
36. •Replace with a charged
battery pack (
(cont.)
pg. 8).
Advertisement
Table of Contents
