Assembly - Gardena SR 1600 Operating Instructions Manual

Bottom nozzle
Joints nozzle
Thread algae nozzle
Wide nozzle with
rubber lip

4. Assembly

Fitting the Pond Silt Remover /
Wet Suction Unit /
Dry Suction Unit :
9
z
2a
2
7
3
12
Applications of the various adapter nozzles
For sucking pond silt up from the bottom of the pond.
The bottom nozzle can be adjusted to suit the conditions at the
bottom of the pond :
• Bottom nozzle fully open (10 mm): use on pond liners (no
pebbles on the bottom, thick layer of silt).
• Bottom nozzle closed (2 mm): use on pond liners (pebbles as
bottom covering, thick layer of silt).
For optimum suction in rigid pond liners and of thin layers of silt,
turn the bottom nozzle through 180°.
For sucking from narrow spaces, such as between stones and
plants.
For sucking up thread algae.
For sucking up residual water e.g. on terraces, in garages,
cellar etc.
1. Undo the filter tray locks
2. Remove all parts from the filter tray
3. Replace the motor housing
4. Insert the end piece of the suction hose
suction opening of the filter tray
5. Attach the transparent suction tube
8
6. Attach the black suction tubes
6
6
and remove the motor housing
3
.
7
and lock it in position.
8
into the upper
3
.
z
to the handle
2a
2
.
7
.
9
.