Advertisement
Operating
Your Dryer
I
In This Section
Page
Page
I
Before starting your
dryer .................................
6
Selecting
a cycle ..............................................
.6
Starting
or stopping
your dryer ...................... .6
Operating
your dryer properly
ensures
the best drying results. This section gives you important
information
to help you to select a cycle, time, and temperature.
Before
starting
your dryer
Refer to the information
below, and "Laundry
NOTE:
To remove dust from storing and
Kps" on page 12 for control setting, sorting,
shipping,
wipe out dryer drum with a damp
and loading information.
cloth before using.
Starting
or stopping
your dryer
Starting
your
dryer
Close the door and select a cycle. Push the Start
Button. See pages 6-8 for additional
setting
information.
Your dryer automatically
stops when
a cycle ends.
Stopping
and restarting
your
dryer
Open the dryer door or turn the Cycle Control
Knob to OFF. Close the door; make new selec-
tion (if necessary).
Push the Start Button.
NOTE:
The Cycle Control Knob should point to
an OFF area when the dryer is not in use. If the
dryer is stopped
before the cycle is finished,
turn
the Cycle Control Knob to an OFF area.
Selecting
a cycle
Use your High Heat automatic
cycle to dry
most loads. See "Using the High Heat auto-
matic cycle" and "Using the Timed (high heat)
cycle" for more information.
1.
Select a cycle by turning the Cycle Control
Knob either way to a desired time or setting.
2. Stop when the indicator
on the knob's outer
ring points to the setting you want.
3. Push the Start Button.
Changing
a selection:
1.
Turn the Cycle Control Knob to point to a
new setting.
2. Push the Start Button, if necessary.
6
Advertisement
