Operating Your Dryer - Roper REL4622BL0 Use And Care Manual

Operating Your Dryer
I
In This Section
Paw
Bet~aB~ngyourdry#,,,-.-.-- ---. 6
Undentanding your cyder -..--.........M-.7
Startingyourdrysr,- . . . . . . ..--......-.... --.6
Meeting the right cycle and
l
etting ,.-.--.g
Stopping your dryer ,-,,,---,--...6
End of cycle signal --..------_y 11
Restarting your drycw -.._-_l.-...l --.6
The information in this section helps you learn to use your dryer efficiently and safely. Refer to
"Laundry TIPS" on page 16 for additional control setting, sorting, and loading information.
Before starting your dryer
Wipe the dryer drum with a damp cloth before
using to remove dust from storing and
shipping.
Starting your dryer
1. Load clothes into the dryer and close the
door.
2. Turn the Cycle Control Knob either way to
the desired setting. (If your dryer has a
Temperature Selector, set the selector to
the desired setting.)
3. Push the Start Button.
NOTE:
Your dryer stops automatically when a
cyde ends.
Stopping your dryer
You can stop your dryer any time during a cycle.
Open the dryer door or turn the Cycle Control
Knob to OFF.
NOTE:
The Cycle Control Knob should point to
an OFF area when the dryer is not in use. If you
want to stop the dryer before the cycle is
finished, turn the Cycle Control Knob to an OFF
area.
Restarting your dryer
1.
Close the door.
2. Select a new cycle and temperature (if
necessary).
3. Press the Start Button.
6
Push to start