Foot Pedal Control Installation - usi 1800-2700 Owner's Manual

FOOT PEDAL CONTROL
Foot pedal keeps both hands free to better control substrate and for
continuous feeding. Customer installed, it plugs into jack provided.
Jack
Photo 24-1
To Install:
a) Plug foot pedal into jack located on left rear corner by the power cord. Photo 24-1.
b) Turn drive switch "ON". (Now control forward drive with the foot pedal.)
NOTE: The drive switch must be "ON" for foot pedal to work.
NOTE: If your laminator is equipped with automatic reverse, the laminator can only be reversed with the drive switch.
The foot pedal will not reverse feed rollers.
23