Dubbing Still Images Recorded On A Tape To A Memory Card; Editing; Dubbing To A Vcr - JVC GR-D790U Instructions Manual

42 FEATURES FOR RECORDINGS
EN
Dubbing Still Images Recorded On
A Tape To A Memory Card
Still images can be dubbed from a tape to a
memory card.
1
Load a cassette. (
2
Load a memory card. (
3
Set "SNAP/SLOW" to the desired mode.
(except "SLOW",
4
Set the VIDEO/MEMORY Switch to
"VIDEO".
5
Set the Power Switch to "PLAY" while
pressing down the Lock Button located on the
switch.
6
Set "[T] ➝ [M] COPY" to "ON". (
7
Press 6 to start playback.
8
At the point you want to dub, press 6
again to engage Still Playback.
9
To dub the image, press SNAPSHOT.
The " " indication appears during dubbing.
NOTE:
To use Playback Special effects with a video
image you wish to dub, perform up to step 9 using
the remote control. (
pg. 16)
pg. 17)
pg. 33, 35)
pg. 35)
pg. 24)

EDITING

Dubbing To A VCR

To use this camcorder as a player
1
Following the illustration,
"Connections To A TV Or VCR" , connect the
camcorder and the VCR's input connectors.
2
Perform steps 1 - 6 (
3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR's
instruction manual.)
4
To stop dubbing, stop recording on the
VCR, then stop playback on the camcorder.
NOTES:
It is recommended to use the AC Adapter as
the power supply instead of the battery
pack. ( pg. 13)
To choose whether or not the following displays
appear on the connected TV
• Date/time
Set "DATE/TIME" to "ON" or "OFF"
( pg. 35). Or, press DISPLAY on the remote
control to turn on/off the date indication.
• Time code
Set "TIME CODE" to "OFF" or "ON"
( pg. 35).
• Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/
TV" ( pg. 35).
pg. 23,
pg. 23)