Initializing A Memory Card - JVC GR-D790U Instructions Manual

30 ADDITIONAL FEATURES FOR D.S.C.
EN
To Print By Selecting Still Images And
Number Of Prints
1
Perform steps 1 – 3 in "To Print All Still
Images (One Print For Each)" (
2
Select "CURRENT",
press SET or . The DPOF
2
screen appears.
3
Press or to select
1 2
the desired file.
Select
4
Press or to select the number indication
4 3
(00), and press SET.
5
Select the number of prints
by pressing to increase the
3
number, or to decrease the
4
number, and press SET.
3
Repeat steps through
for the desired number of
prints.
The number of prints can
be set up to 15.
To correct the number of
prints, select the image
again and change the number.
6
Select "RETURN", press
SET. The "SAVE?"
appears.
If you did not change any
3
settings in step through
5
, the DPOF Menu
reappears.
7
Select "EXECUTE", press SET.
To cancel selection, select "CANCEL".
pg. 29).
DPOF
SHEETS
02
RETURN
1
Select
2
SET
5
DPOF
SHEETS
02
DPOF
SAVE?
EXECUTE
CANCEL
To Reset The Number Of Prints
1
Perform steps 1 – 3 in "To Print All Still
Images (One Print For Each)" (
2
Select "RESET", press SET or
DPOF screen appears.
3
Select "EXECUTE", press SET.
To cancel selection, select "RETURN".
The number of prints is reset to 0 for all still
images.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
NOTE:
When the image is printed from the printer, a
black bar appears at the bottom of the screen.
This is not a malfunction. By recording with "DIS"
de-activated ( pg. 32) this can be avoided.

Initializing A Memory Card

You can initialize a memory card any time.
After initializing, all files and data stored in the
memory card, including those which have
been protected, are cleared.
1
Perform steps 1 – 3 in "Normal Playback Of
Images" ( pg. 27).
2
Press MENU.
3
Select "FORMAT", press SET
or . The FORMAT screen
2
appears.
Press 1 whenever you want to
return to the previous menu
screen.
4
Select "EXECUTE",
press SET. The memory
card is initialized.
When initialization is
finished, "NO IMAGES
STORED" appears.
To cancel initialization, select "RETURN".
pg. 29).
. The
2
1
Select
2
SET
FORMAT
ERASE ALL
EXISTING DATA?
EXECUTE
CANCEL