Playback Menus - JVC GR-D790U Instructions Manual

Playback Menus

VTR
The settings below are effective only for video
playback except "REC MODE" and "SNAP/
SLOW". The parameters (except "SOUND L/
R", "[T] ➝ [M] COPY" and "NARRATION"
settings) are the same as in the description on
page 33.
SOUND L/R and NARRATION
During tape playback, the camcorder detects
the sound mode in which the recording was
made, and plays the sound back. Select the
sound to accompany your playback picture.
REC MODE
Allows you to set the video recording mode
(SP or LP) depending on your preference. It is
recommended you use "REC MODE" in
VIDEO Menu when using this camcorder as a
recorder during dubbing. (
* SP indicator does not appear on the screen.
NARRATION
[OFF]: Original sound is output on both "L" and
"R" channels in stereo.
ON: Dubbed sound is output on both "L" and
"R" channels in stereo. (
MIX: Original and dubbed sounds are
combined and output in stereo on both "L" and
"R" channels.
SNAP/SLOW
pg. 33, "SNAP/SLOW".
[T] ➝ [M] COPY
[OFF]: When the SNAPSHOT button is
pressed during tape playback, the playback
image pauses and normal playback will
resume after approximately 6 seconds. (The
still image is not recorded.)
ON: Enables dubbing of images recorded on a
tape to a memory card. (
SOUND L/R
[STEREO ]: Sound is output on both "L" and
"R" channels in stereo.
SOUND L : Sound from the "L" channel is
output.
SOUND R : Sound from the "R" channel is
output.
[SP]* / LP
pg. 42, 43)
pg. 45).
pg. 42).
MENUS FOR DETAILED ADJUSTMENT
Each setting (except "OFF" in "ON SCREEN",
"DATE/TIME" and "TIME CODE") is linked with
"DISPLAY", which appears when the Power
Switch is set to "REC".
The parameters (except "OFF" in "ON
SCREEN" setting) are the same as in the
description on
ON SCREEN
When set to "OFF", the camcorder's display
disappears.
DATE/TIME
CLOCK ADJ.
pg. 15, "Date/Time Settings"
TIME CODE
pg. 20, "Time Code"
16:9 OUTPUT
pg. 34, "16:9 OUTPUT"
BRIGHT
pg. 15, "Brightness Adjustment Of The
Display"
Each setting (except "DEMO MODE") is linked
with "SYSTEM", which appears when the
Power Switch is set to "REC".
The parameters are the same as in the
description on page 34.
DISPLAY
pg. 34.
OFF / [LCD] / LCD/TV
[OFF] / ON
[OFF] / ON
4:3 TV / [16:9 TV]
SYSTEM
35
EN