Connecting The Cables; Connecting The Power Cable; Connecting The Usb Cable - Kodak 605 User Manual

Connecting the Cables

Connecting the Power
Cable
Connecting the USB
Cable
April 9, 2007
You must install the printer driver before connecting the
IMPORTANT:
cables.
Install the printer driver software before you connect the cables.
Chapter 1 , Installing the Printer
If you received more than one power cable with your printer, make sure to
use the correct power cable for your country.
Check that the power switch is turned off ( ).
1.
CAUTION
:
The power outlet must be grounded. An ungrounded outlet can
cause fire, electric shock, or harmful interference to nearby
electrical devices.
Connect the power cable to the power connector on the back of the
2.
printer and to a grounded power outlet.
Check that the power switch is turned off ( ).
1.
Connect the USB cable that was included with the printer to the USB
2.
connector on the back of the printer and to the USB connector on the
computer.
Setting Up the Printer
Driver, for instructions.
See
2-5