Connecting The Cables; Turning On The Printer - Kodak Professional ML-500 Operator's Manual

Digital photo print system

Hide thumbs Also See for Professional ML-500:

Table of Contents

Connecting the Cables

April 2002

Plug the power cable into the printer, then into the outlet. See

Requirements, page

A-2.

Plug one end of the IEEE 1394A cable into the printer, and the other end

into the IEEE 1394A port on your computer.

Turn the power switch to the ON position (I).

The printer starts and performs a self-check for about one minute.

INITIALIZING appears on the display during the self-check. After the self-

check has completed, READY appears on the display and the STATUS indicator

appears green.

If the system fails to start up, see

Setting up the Printer

Troubleshooting, page

4-1.

Power

2-9

Table of Contents