Autofocus - Canon VIXIA HF G20 Instruction Manual

Focus Adjustment
5 After adjusting the focus, touch [ON] to return to the preset focus position.
• Touch [SET] again to cancel the current preset focus position.
• [ON] will be grayed out while adjusting the focus or zoom.
• You can use the q
camcorder returns to the preset focus position.
NOTES
48
• The preset focus position will be canceled when the camcorder is turned off.
• When the camcorder is in
Peaking
When peaking is activated, the edges of objects in focus will be highlighted in red, blue or yellow on
the screen. In addition, you can choose to switch the screen to black & white, further emphasizing the
edges.
1 Open the focus controls.
>
[FUNC.] [< Focus]
2 Touch [w].
For the black & white setting: Touch [Off] or [On]
For the peaking color: Touch [Red], [Blue] or [Yellow]
3 Touch [K].
4 Touch [O].
• Peaking is activated and edges are highlighted. You can turn the focus ring on this screen or
touch [X] to hide the focus controls.
• Touch [O] again to turn off the peaking effect.
NOTES
• The peaking effect and black & white picture will not appear in your recordings.

Autofocus

When autofocus is activated, the camcorder continuously adjusts the focus on the subject in the
center of the screen. The focusing range is 2 cm (0.8 in.; at full wide-angle, measured from the front of
the lens barrel) to G and 60 cm (2 ft.; throughout the zoom range, measured from the front of the
lens barrel) to G. Perform the following procedure to set the autofocus speed.
1 Open the [AF Mode] screen.
>
[FUNC.] [MENU]
2 Touch the desired option and then touch [X].
• The icon of the selected option appears on the screen.
>
[Focus Preset Speed] setting to adjust the speed at which the
mode, the focus preset function cannot be used.
> p >
[AF Mode]