Storing And Transportation; Transport Using A Forklift; Manual Transport - Bosch Compress 3000 DW FO Installation Instructions Manual

10 | Appliance details
Operating ambient air temperature range:
Operating ambient temperature range (Heat pump only): 3 -
40 °C
Range of warehouse storage temperature: -20~60 °C
Set point for the hot water temperature: fixed at 60 °C
In Combi Mode the appliance can operate
beyond the normal temperature range by the
use of the electrical heater only.
3.4

Storing and transportation

As a rule, the unit is to be stored and/or transported in its
shipping package in upright position and with an empty tank.
For transport over short distances, and provided due care is
taken, an inclination angle of up to 20° is permitted. Both
during transport and storage, ambient temperatures of - 20 to
+60 °C are permissible.

3.4.1 Transport using a forklift

When transported by a forklift, the unit must remain mounted
on the pallet. The lifting rate should be kept to a minimum. Due
to its top-heaviness, the unit must be secured against tipping
over. To prevent any damage, the unit must be placed on a level
surface!

3.4.2 Manual transport

For the manual transport, the wooden pallet can be used for
bottom part as long as the carrying straps are secure. Care
must be taken that the maximum permissible inclination angle
of 20° from vertical is not exceeded. If transport in an inclined
position cannot be avoided, the unit should only be taken into
operation one hour after it has been moved into it's final vertical
position.
Fig. 4
6 720 801 244 (2013/08)
6720801244-18.1V
WARNING:
Heat pumps are heavy and bulky. Australian
States and Territories have a Principal
Occupational Health and Safety (OH&S) Act
which contains requirements relating to the
handling of large, bulky or awkward items.
Persons installing this heat pump system
must be aware of their responsibilities and
be adequately trained and qualified in
accordance with local OH&S requirements.
WARNING: Transport damage!
▶ Avoid tilting the appliance at an angle of
more than 20°.
▶ Take care when handling the appliance.
▶ To avoid dropping the appliance and
damaging internal components, do not
pivot the appliance.
WARNING: Transport damage!
▶ To avoid transport damage, wait until the
appliance is at the installation location to
remove the protective packaging.
▶ Use straps to prevent the appliance from
becoming scratched.
▶ Use suitable means of transport to bring
the appliance to the installation location
(special car, pallet truck, etc).
Compress 3000 DW FO