Table of Contents
Advertisement
#$ #$ #$ #$
EN
EN
EN
EN
The Full-Function Remote Control Unit can operate
this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional
playback functions possible. (
If you want to perform Random Assemble Editing
(
pg. 60 – 65), use the optional RM-V717KITU
Remote control kit. It is a set composed of the RM-
V717U remote control, the Editing cable* and the
Editing extension cable.
* The Editing cable is not required with this
camcorder.
Install The Battery
RM-V718U (provided)
The remote control uses one lithium battery
(CR2025).
1
Pull out the battery holder by inserting a pointed
instrument into the slot.
2
Insert the battery in the holder, and be sure to
have the "+" mark visible.
3
Slide the holder back in until you hear a click.
Slot
Installing The Batteries
RM-V717U (optional)
The remote control uses two "AAA (R03)" size
batteries.
1
Remove the battery compartment cover while
pushing up the tab as illustrated.
2
Insert two "AAA (R03)" size batteries in the
correct direction.
3
Re-attach the battery compartment cover.
Tab
pg. 58)
+
–
–
+
Insert the minus (–) end first.
USING THE REMOTE CONTROL UNIT
Beam Effective Area (indoor use)
When using the remote control,
be sure to point it at the remote
sensor. The transmitted beam's
approximate effective distance
for indoor use is 5 m (16 ft).
NOTE:
The transmitted beam may not
be effective or may cause
incorrect operation when the
remote sensor is directly
exposed to sunlight or powerful
lighting.
Remote sensor
Hide quick links:
Advertisement
Table of Contents
