Table of Contents
Advertisement
Brightness Adjustment Of The
Display
1
Set the Power Switch to "A", "M" or "PLAY"
while pressing down the Lock Button located on
the switch.
2
Open the LCD monitor fully.
3
Press MONITOR BRIGHT + or – until the bright
level indicator on the display moves and the
appropriate brightness is reached.
It is also possible to adjust the brightness of the
viewfinder. Pull out the viewfinder fully, set
"PRIORITY" in the SYSTEM menu to "FINDER"
(
pg. 31, 32) and perform step 3.
BR I GHT
MONITOR BRIGHT +/- Button
Operation Mode
To turn on the camcorder, set the Power Switch to
any operation mode except "OFF" while pressing
down the Lock Button located on the switch.
Lock Button
POWER/CHARGE Lamp
VIDEO/MEMORY Switch
Power Switch
Choose the appropriate operation mode according
to your preference using the Power Switch and
VIDEO/MEMORY Switch.
Power Switch Position
A (Full Auto Recording):
Allows you to record using NO special effects or
manual adjustments. Suitable for standard
recording.
The "A" indicator appears on the display.
M (Manual Recording):
Allows you to set various recording functions
using the Menus. (
pg. 31)
If you want more creative capabilities than Full
Auto Recording, try this mode.
There is no indication on the display.
OFF:
Allows you to switch off the camcorder.
PLAY:
Allows you to play back a recording on the
tape.
Allows you to play back a video clip on the
memory card.
Allows you to display a still image stored in the
memory card or to transfer a still image stored in
the memory card to a PC.
Allows you to set various playback functions
using the Menus. (
VIDEO/MEMORY Switch Position
VIDEO:
Allows you to record on a tape or play back a
tape. If "REC SELECT" is set to "
(
pg. 39), still images are recorded both on the
tape and the memory card.
MEMORY:
Allows you to record in a memory card or
access data stored in a memory card.
When the Power Switch is set to "A" or "M", the
currently selected image size appears.
Power-Linked Operation
When the Power Switch is set to "A" or "M", you
can also turn on/off the camcorder by opening/
closing the LCD monitor or pulling out/pushing in
the viewfinder.
! ! ! !
EN
EN
EN
EN
pg. 31, 40)
/
"
Hide quick links:
Advertisement
Table of Contents
