Adjusting The Seat Depth - Invacare Storm4 Instruction Manual

Power chair
Hide thumbs Also See for Storm4:
Table of Contents

Advertisement

8.9.2

Adjusting the seat depth

Note
Please also refer to the previous chapter entitled "Adjusting the seat width".
The seat depthcan be adjusted in stages between 38 and 53 cm.
Requirements:
• 4 mm Allen key
• 8 mm jaw spanner
• oblique pliers
• cable binder
Note
Particular holes in the seat support must be used to the screws depending on the required seat
depth. It may also be necessary to replace the seat support plate.
• Please use the following figures and the table to determine which holes need to be used for the
required seat depth, and therefore whether the seat support plate needs to be replaced or not.
69

Advertisement

Table of Contents
loading

Table of Contents