Table of Contents
Advertisement
3. While holding the shoe against the rim,
tighten the shoe fixing nut.
4. Pass the inner cable through the inner
cable lead. Set the cable with a clearance
of 1mm between each brake pad and the
rim, tighten the cable fixing bolt.
58
SC/2012
SHEPPARD CYCLES ABN 60 082 376 289
5. Adjust the balance with the spring tension
adjustment screws.
6. Depress the brake lever about 10 times as
far as the grip and check that everything is
operating correctly and that the shoe
clearance is correct before using the brakes.
If further adjustment is required, loosen and
then re-tighten cable fixing bolt as per 4.
Fine tuning can be achieved via the adjusting
screw at the brake lever.
Advertisement
Table of Contents
