Diamondback SHEPPARD CYCLES Owner's Manual page 18

front/rear
drop outs
front/rear
hubs
front/rear
drop outs
front/rear
hubs
16
SC/2012
SHEPPARD CYCLES ABN 60 082 376 289
Non-Threaded
retaining
washer
axle nut
step
washer
retaining washer
Threaded
retaining
washer
axle nut
step
retaining washer
8 . Axle Peg Assembly Instructions
NON-THREADED
First remove the axle nut from the wheel. There will be either a retaining washer or a step
retaining washer included. Place this washer between the peg and the frame of the
bicycle. Slide the peg onto the axle followed by a flat washer and lastly the axle nut.
Tighten the axle nut clockwise until the peg fits snugly against the frame or fork. Repeat
for all the remaining pegs.
THREADED
This syle of peg is threaded to fit the axle. Make sure the axle nut is tight with a
15mm wrench. Place a screw driver through the mounting holes of the peg and
attach the peg to the axle by turning clockwise. Tighten against the frame or fork for
a snug fit. repeat for all the remaining pegs
PLEASE NOTE Not all axles are able to accept pegs. Please consult
our service department if you have any questions. Some BMX bicycles
come with two or four pegs. If your bicycle is a dirt Jumping style
bicycle, you will receive only two pegs. These are designed for the front
wheel. Freestyle bicycles come with four pegs, two for each wheel.
9 . Finally
For BMX bicycles attach the safety crash pads as shown. Check tyre pressure is
inflated to the range recommendation on the tyre sidewalls. Attach the orange
reflectors to the spokes of both wheels directly opposite the valve stem and within
76mm of the rim. Attach the white reflector to the front reflector bracket and the red
reflector to the rear reflector bracket using an 8mm spanner or Phillips head
screwdriver. Attach the bell to the left handlebar near the grip. Before riding ensure all
nuts, bolts and fittings on the bicycle have been correctly tightened. Correct
maintenance of your bicycle will ensure many years of happy riding. Service your
bicycle regularly yourself by referring to the relevant sections of this manual OR take it
to your specialist bicycle shop.