Schedule 2 . Service Checklist - Diamondback SHEPPARD CYCLES Owner's Manual

Schedule 2 . Service Checklist

Frequency Task
Before every ride Check tyre pressure
Check brake operation
Check wheels for loose spokes
Make sure nothing is loose
After every ride Quick wipe down with damp cloth
Weekly Lubrication as per schedule 1
Monthly Lubrication as per schedule 1
Check derailleur adjustment
Check brake adjustment
Check brake and gear cable adjustment
Check tyre wear and pressure
Check wheels are true and spokes tight
Check hub, head set and crank bearings for looseness
Check pedals are tight
Check handlebars are tight
Check seat and seat post are tight and comfortably adjusted
Check frame and fork for trueness
Check all nuts and bolts are tight
6 Monthly Lubrication as per schedule 1
Check all points as per Monthly service
Check and replace brake pads if required
Check chain for excess play or wear
Yearly Lubrication as per schedule 1
WARNING: Like any mechanical device, a bicycle and its components are subject to wear and stress. Different materials
and mechanisms wear or fatigue from stress at different rates and have different life cycles. If a component's life cycle is
exceeded, the component can suddenly and catastrophically fail, causing serious injury or death to the rider. Scratches,
cracks and discolouration are signs of a stress-caused fatigue and indicate that a part is at the end of its useful life and
needs to be replaced.
Page Reference
38
53
37
36
32
34
34
72
53
53, 71
38
37
42, 48, 64
61
46
51
45
36
34
35
60
68
34
SC/2012
SHEPPARD CYCLES ABN 60 082 376 289
35