Below The Bar Shifters; Hand Grip Shifters - Diamondback SHEPPARD CYCLES Owner's Manual

Table of Contents

Advertisement

Left
Low gear front
High gear front
Front Low Gear
Low Gear
Front High Gear
30
SC/2012
SHEPPARD CYCLES ABN 60 082 376 289

Below the Bar Shifters

Right
Many of today's more upmarket Mountain style bicycles now use a shift
lever arrangement mounted on the underside of the handlebars, which uses
High gear rear
two levers operated by the thumb and index finger.
To select a lower gear push the larger (lower) right shifter with your thumb
to engage a larger rear cog. One firm push shifts the chain one cog,
continuing to push will move the chain over multiple cogs. Pushing the
smaller (upper) left shifter with your index finger moves the chain from a
Low gear rear
larger to a smaller chainwheel.
To select a higher gear push the smaller (upper) right lever with your index
finger to engage a smaller rear cog. Pushing the larger (lower) left lever
with your thumb will move the chain from a smaller to a larger chainwheel.

Hand Grip Shifters

Rear
Some bicycles are now being equipped with a shifting mechanism,
called Grip Shift
not make use of separate levers.
The actuating mechanism is built into the inside part of the grip that
the web of the thumb and index finger closes around.
Rear High Gear
To select a lower gear, twist the right shifter toward you to engage a
larger rear cog.
You can shift one gear at a time by moving the Grip Shift
or through multiple gears by continued twisting. By twisting the left
shifter forward or away from you a smaller chainwheel can be selected.
To select a higher gear, twist the right shifter forward or away from you
to engage a smaller rear cog. To engage a larger front chainwheel,
twist the left shifter towards you.
Single shifts can be achieved by twisting one click at a time and multiple
shifts by larger twists.
, which is built into the handlebar grips and does
one click,

Advertisement

Table of Contents
loading

Table of Contents