Installation Instructions; Reversing The Door Swing - GE GFDS175 Owner's Manual

REVERSING THE DOOR SWING (if desired)
IMPORTANT NOTES
• Read the instructions all the way through before
starting.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid
using them in the wrong places.
• Provide a non-scratching work surface for
the doors.
• Normal completion time to reverse the door swing
is 30–60 minutes.
TOOLS YOU WILL NEED
Phillips-head screwdriver
DOOR PARTS
6 - Tapping Screws
BEFORE YOU START
Unplug the dryer from its electrical outlet.

Installation Instructions

Outer Ring Inner Door
4 - Hinge Screws
IMPORTANT: Once you begin, do not move the
cabinet until door-swing reversal is completed.
These instructions are for changing the hinges
to switch them back to the right side, follow these
same instructions and reverse all references
to the left and right.
Putty Knife or Thin-Blade Screwdriver
Hinge
8 - Machine Screws 4 - Beauty Buttons
10
Hinge Cover
2 - Strike Bracket
Screws